logo

System Description EarthImager/2D Software SuperSting R1/IP MiniSting
SuperSting R8/IP SuperSting Marine Swift Electrode Cables  
       

DC Resistivity, IP & SP Systems & Software

System description

SwiftThe AGI range of products comprise a suite of geophysical instruments designed for the rapid collection and interpretation of DC resisitivity, induced polarization (IP) and self-potential (SP) data.

The DC resistivity imaging method is especially valuable in areas where ground penetrating radar (GPR) and electromagnetic (EM) methods do not work because of conductive overburden. Conductive materials, for example clay, attenuate the GPR & EM signal resulting in low depth penetration and poor data quality. In such areas the resistivity method is an excellent alternative for subsurface 2D and 3D mapping of the near surface.

Field Procedure

Field procedure is simple and involves three easy steps:

  1. First set out electrode stakes at even intervals.

  2. Then lay out the Swift cable and attach each take-out to the stakes.

  3. Finally connect the Sting to the Swift cable, perform an automatic test to check that everything is connected correctly and then start the automatic recording.

The resistivity measurements are stored directly in the memory of the receiver unit. When the field measurement is complete the data can be downloaded to a PC, inverted from apparent resistivity into "true" resistivity, and presented as a color cross-section of the subsurface.

For special studies a PC can also be connected to the Sting/Swift to control the measurement procedure and thereby automatically record data from any possible electrode array.

A complete system is composed of:

  1. a transmitter/receiver (i.e. MiniSting, SuperSting R1, SuperSting R8, SuperSting Marine)

  2. a multi-electrode cable (Swift)

  3. electrodes

  4. software (EarthImager/2D)

 

Instrument Summary:

SuperSting R8 IP, is an eight channel instrument with IP capabilities, specially designed for large surveys like 3D, bore hole to bore hole and very large 2D surveys. The SuperSting R8 is an 8-channel instrument which takes up to eight readings for each current injection. The SuperSting R8 is therefore up to eight times faster than the one-channel instruments, important when performing large time consuming surveys.

SuperSting R1 IP is a single-channel version of the SuperSting R8 and has superseded the old Sting R1.

The MiniSting is a low cost, single channel earth resistivity and IP instrument which saves data to memory.

Swift multi-electrode cables - All "Sting" models work with the Swift multi-electrode cables.

Applications include:

  • Geotechnical investigations;

  • Fracture and cavity detection in bedrock;

  • Groundwater exploration;

  • Environmental investigation (i.e., mapping of pollution plumes, etc.)

  • Investigation of dam leakage;

  • Sand and gravel exploration (i.e. paleochannel delineation);

  • Site characterization for development;

  • Site investigation for horizontal drilling;

  • Site investigation for tunnelling operation;

  • Archaeological studies.


 

landfill Results are easy to interpret and understand.

LEFT: Cross-section showing a municipal landfill, created from Sting/Swift data using inversion software.

reddog@geoafrica.co.za

 Ph: +27-(0)11-467-3371

Mobile: 082 89 2 9771

 26 Crestwood Drive, Lonehill